Standard Ball Joint Taper Reamers
For deburring or enlarging tapered holes for tie-rod ends or ball joint studs.
This tool can be used in a 1/2" chuck by removing the T-handle.
| UPC No. | Size | Taper | Overall Length | Flute Length | Large Diameter | Small Diameter |
| 85020 | 2 | 1 1/2" /ft (7.15 Degrees) | 6 1/2" | 4 1/2" | 1" | 7/16" |
| 85025 | 2.5 | 1 1/2" /ft (7.15 Degrees) | 6 1/2" | 4 1/2" | 1 5/16" | 3/4" |
| 85030 | 3 | 1 1/2" /ft (7.15 Degrees) | 6 1/2" | 4 1/2" | 1 1/2" | 15/16" |
| 85101 | N/A | 10:1 (5.71 Degrees) | 6 1/2" | 4 1/2" | .887 (22.5MM) | .437 (11.1mm) |
| 85500 | N/A | 2" /ft (9.56 Degrees) | 6 1/2" | 4 1/2" | 1 1/8" | 3/8" |